XYGATE: Unable to connect GUI (XRM, XSM , XCF) - No connection could be made because the target machine actively refused

XYGATE: Unable to connect GUI (XRM, XSM , XCF) - No connection could be made because the target machine actively refused

The IP address is incorrect and/or the port specified is not available to XTR.

Resolution: Verify the IP address of the Nonstop is correct and confirm the XTR Listner has been started. (this opens the port the GUI will connect to) This error occurs most commonly when XTR listner down.

If you have the PORTCONF entry for the XTR LISTNER, please start it again.

For example, LISTNER /NAME , IN $VHS, OUT $VHS, TERM $VHS, NOWAIT/ $SYSTEM.XYGATETR.PORTCONF 

OR

If you are using a temporary standalone LISTNER process, it can be started using the following commands:

Step 1: Logon as an owner of XTR 

    TACL> LOGON <owner of XTR >

Step 2: Install XTR macro

    TACL > RUN XTR INSTALL

Step 3: Run XTR_START_LISTNER on the TCPIP stack in use. 

For example, if the TCPIP stack name is $ZTC0 and the port you wish to use is 4002:

    TACL > XTR_START_LISTNER 4002 $ZTC0

When XTR LISTNER has started, please make a new GUI connection.


If you are unable to locate the solution needed or if you need additional assistance please Click Here to open a case from our Customer Care Portal.






    • Related Articles

    • XMA: Filter to send an email alert when using XCF to update XYGATE configuration files

      This is an example filter you can modify to use in your own environment to generate email alerts when XYGATE configuration files are updated with XCF. !====================================================================== ! Alert when ACL or CONF ...

    • XYPRO GUIs can't connect to the NonStop host after the host ip address is changed

      If the user cannot connect to the NonStop host after the host ip address has been changed, then both XYGATETR (XTR) on the NonStop host and the GUI must be modified to reflect the new ip address 1. If XYGATE/TR (XTR) is configured on multiple NonStop ...

    • XSW: Unable to start XCF through XSW GUI

      Start the XSW GUI as an administrator. Right click xygatesw.exe and click "run as administrator". If this article did not provide a solution, please open a case with our support team by sending an email message to support@xypro.com.

    • XYGATE License Expiration

      XYGATEAC Product license file: P06F001 Macro to install license: XAC_INSTALL_LICENSE Expiration behavior: The DBSO program reads the license file on startup to determine when the license will expire. The license is checked once each day from then on ...

    • XSM: XSM_REPORT not showing an audit file name.

      Logon to the system at issue via the XSM GUI and perform a valid Safeguard operation in order to generate XSM audit records. Check the SMCONF file to make sure that an AUDIT file location has been specified. If one has been configured, do a FILEINFO ...